(336) 555-0100
Free Cost Guides

How Much Do Services Cost in the Triad?

Get real pricing data for home services, contractors, and trades in Greensboro, Winston-Salem, High Point, and across the Piedmont Triad.

How Much Do Plumbers Cost in the Triad?

Low End

$150

Average

$350

High End

$800

per job · Based on Triad area pricing

Plumbing costs in the Triad vary based on the complexity of the job. Simple repairs like fixing a leaky faucet run $150-$250, while major work like water heater replacement or sewer line repair can cost $500-$2,000+.

Factors That Affect Price

  • Type of repair (simple fix vs. major pipe work)
  • Emergency vs. scheduled service
  • Parts and materials needed
  • Accessibility of plumbing
  • Time of day / weekend rates

How Much Do Electricians Cost in the Triad?

Low End

$150

Average

$400

High End

$1,200

per job · Based on Triad area pricing

Electrical work in the Triad ranges from $150 for simple outlet work to $1,200+ for panel upgrades. EV charger installation typically runs $500-$1,500 including permits.

Factors That Affect Price

  • Scope of electrical work
  • Panel upgrade vs. outlet installation
  • Permit requirements
  • Code compliance updates needed
  • EV charger or specialty installation

How Much Do HVAC Cost in the Triad?

Low End

$150

Average

$500

High End

$8,000

per service · Based on Triad area pricing

HVAC costs in the Triad range from $150 for a tune-up to $4,000-$8,000 for a full system replacement. The Triad's hot summers and cold winters mean your HVAC system works hard year-round.

Factors That Affect Price

  • Repair vs. full system replacement
  • Type of system (central air, heat pump, ductless)
  • Home square footage
  • Ductwork condition
  • Energy efficiency rating (SEER)

How Much Do Roofers Cost in the Triad?

Low End

$300

Average

$8,000

High End

$20,000

per project · Based on Triad area pricing

Roofing in the Triad costs $3-$7 per square foot on average. A full roof replacement on a typical home runs $8,000-$15,000 for asphalt shingles, or $15,000-$25,000 for metal roofing.

Factors That Affect Price

  • Roof size (square footage)
  • Material type (asphalt, metal, tile)
  • Number of layers to remove
  • Roof pitch and complexity
  • Storm damage vs. planned replacement

How Much Do General Contractors Cost in the Triad?

Low End

$5,000

Average

$30,000

High End

$100,000

per project · Based on Triad area pricing

General contracting costs depend heavily on the project. Kitchen remodels in the Triad average $15,000-$50,000, bathroom remodels $8,000-$25,000, and home additions $100-$300 per square foot.

Factors That Affect Price

  • Project scope and complexity
  • Materials quality and selection
  • Permits and inspections
  • Subcontractor requirements
  • Timeline and scheduling

How Much Do Landscaping Cost in the Triad?

Low End

$50

Average

$300

High End

$5,000

per service · Based on Triad area pricing

Weekly lawn mowing in the Triad runs $30-$75 per visit. Full landscape design and installation projects range from $2,000-$10,000+ depending on scope.

Factors That Affect Price

  • Lawn size
  • Service type (mowing, design, hardscape)
  • Plant and material costs
  • Seasonal timing
  • Ongoing maintenance vs. one-time project

How Much Do Cleaning Services Cost in the Triad?

Low End

$100

Average

$200

High End

$400

per visit · Based on Triad area pricing

House cleaning in the Triad averages $120-$250 for a standard home. Deep cleaning and move-out cleaning runs $200-$400+. Weekly service discounts bring per-visit costs down 15-25%.

Factors That Affect Price

  • Home size (bedrooms/bathrooms)
  • Type of cleaning (regular, deep, move-out)
  • Frequency (weekly, bi-weekly, one-time)
  • Special services (windows, carpets)
  • Pet-related cleaning

How Much Do Painters Cost in the Triad?

Low End

$300

Average

$3,000

High End

$8,000

per project · Based on Triad area pricing

Interior painting in the Triad costs $2-$5 per square foot. A full interior paint job for an average home runs $2,500-$5,000. Exterior painting ranges from $3,000-$8,000.

Factors That Affect Price

  • Interior vs. exterior
  • Number of rooms / square footage
  • Paint quality and brand
  • Prep work required (patching, priming)
  • Ceiling height and accessibility

How Much Do Paving & Striping Cost in the Triad?

Low End

$200

Average

$3,500

High End

$25,000

per project · Based on Triad area pricing

Parking lot striping in the Triad runs $200-$1,500 depending on lot size. Residential driveway paving averages $3,000-$7,000. Full commercial parking lot paving ranges from $10,000-$50,000+. Sealcoating runs $0.15-$0.30 per square foot.

Factors That Affect Price

  • Project type (striping only vs. full paving)
  • Square footage / linear footage
  • Asphalt thickness and base prep
  • Parking lot size and stall count
  • ADA compliance requirements

How Much Do Pressure Washing Cost in the Triad?

Low End

$100

Average

$300

High End

$800

per service · Based on Triad area pricing

Driveway pressure washing in NC runs $100-$250 depending on size. Full house wash (siding) averages $250-$500. Deck cleaning runs $150-$300. Commercial parking lot and building washing ranges from $300-$1,500+.

Factors That Affect Price

  • Surface type (concrete, wood, vinyl, brick)
  • Total square footage
  • Hot water vs. cold water cleaning
  • Height and accessibility (2-story homes cost more)
  • Soft wash vs. high-pressure method

How Much Do Tree Service Cost in the Triad?

Low End

$200

Average

$800

High End

$5,000

per tree · Based on Triad area pricing

Tree trimming in NC costs $200-$800 per tree. Full tree removal ranges from $500-$3,000 depending on size. Large trees near structures can cost $2,000-$5,000+. Stump grinding adds $100-$400 per stump.

Factors That Affect Price

  • Tree size and height
  • Proximity to structures or power lines
  • Stump grinding included or separate
  • Emergency vs. scheduled removal
  • Number of trees

How Much Do Water Heater Service Cost in the Triad?

Low End

$150

Average

$1,200

High End

$3,500

per unit · Based on Triad area pricing

Water heater repair in NC costs $150-$500. Tank water heater replacement runs $800-$1,500 installed. Tankless water heater installation ranges from $2,000-$3,500 including venting and gas line work.

Factors That Affect Price

  • Repair vs. full replacement
  • Tank vs. tankless system
  • Gas vs. electric
  • Tank size (40, 50, 75 gallon)
  • Permit and code requirements

How Much Do Siding Cost in the Triad?

Low End

$5,000

Average

$12,000

High End

$30,000

per project · Based on Triad area pricing

Vinyl siding in NC costs $4-$8 per sq ft installed. Hardie board (fiber cement) runs $8-$14 per sq ft. A full siding job on a typical home ranges from $8,000-$20,000 for vinyl, $15,000-$30,000 for Hardie.

Factors That Affect Price

  • Material type (vinyl, Hardie, wood, aluminum)
  • Home square footage
  • Number of stories
  • Removal of existing siding
  • Trim and soffit work

How Much Do Deck Building Cost in the Triad?

Low End

$2,000

Average

$8,000

High End

$25,000

per project · Based on Triad area pricing

A basic pressure-treated wood deck in NC costs $15-$25 per sq ft. Composite decking (Trex, TimberTech) runs $30-$60 per sq ft. A typical 300 sq ft deck costs $4,500-$8,000 in wood or $9,000-$18,000 in composite.

Factors That Affect Price

  • Deck size (square footage)
  • Material (pressure-treated wood, composite, Trex)
  • Height and complexity
  • Railing style
  • Permits and inspections

How Much Do Appliance Repair Cost in the Triad?

Low End

$75

Average

$200

High End

$500

per repair · Based on Triad area pricing

Appliance repair in NC averages $150-$300 including service call and parts. Washer/dryer repairs run $100-$350. Refrigerator repairs cost $150-$400. The diagnostic/service fee is typically $75-$100, applied toward repair.

Factors That Affect Price

  • Appliance type (washer, dryer, fridge, dishwasher)
  • Part availability and cost
  • Brand (premium brands cost more to repair)
  • Warranty status
  • Age of appliance (repair vs. replace)

How Much Do Septic Service Cost in the Triad?

Low End

$250

Average

$400

High End

$15,000

per service · Based on Triad area pricing

Septic pumping in NC costs $250-$500 every 3-5 years. Septic inspection runs $150-$300. Full septic system replacement ranges from $5,000-$15,000+ depending on system type and soil conditions.

Factors That Affect Price

  • Tank size (500-1,500 gallon)
  • Pumping vs. repair vs. replacement
  • Access difficulty
  • Drain field condition
  • Inspection requirements for home sale

How Much Do Fencing Cost in the Triad?

Low End

$1,500

Average

$4,000

High End

$10,000

per project · Based on Triad area pricing

Wood privacy fencing in NC costs $15-$30 per linear foot installed. Vinyl fencing runs $20-$40/ft. Chain link is $10-$20/ft. A typical backyard fence (150-200 linear ft) costs $2,500-$6,000 for wood privacy.

Factors That Affect Price

  • Fence type (wood, vinyl, chain link, aluminum)
  • Linear footage
  • Height (4ft, 6ft, 8ft)
  • Gate count and style
  • Terrain and property grading

How Much Do Kitchen Remodeling Cost in the Triad?

Low End

$8,000

Average

$25,000

High End

$75,000

per project · Based on Triad area pricing

A minor kitchen refresh in NC (paint cabinets, new hardware, countertops) costs $8,000-$15,000. A mid-range remodel runs $20,000-$40,000. High-end full gut renovation with custom cabinets costs $50,000-$75,000+.

Factors That Affect Price

  • Scope (cosmetic refresh vs. full gut)
  • Cabinet quality and quantity
  • Countertop material (laminate, granite, quartz)
  • Appliance upgrades
  • Plumbing/electrical changes

How Much Do Bathroom Remodeling Cost in the Triad?

Low End

$5,000

Average

$15,000

High End

$35,000

per project · Based on Triad area pricing

A basic bathroom update in NC (new fixtures, paint, flooring) costs $5,000-$8,000. A mid-range remodel with new tile, vanity, and shower runs $12,000-$20,000. Master bath renovation with custom tile and glass shower costs $25,000-$35,000+.

Factors That Affect Price

  • Scope (cosmetic vs. full renovation)
  • Fixture quality
  • Tile work complexity
  • Shower/tub conversion
  • Plumbing relocation

How Much Do Flooring Cost in the Triad?

Low End

$1,500

Average

$5,000

High End

$15,000

per project · Based on Triad area pricing

LVP (luxury vinyl plank) in NC costs $3-$7/sq ft installed. Hardwood runs $6-$12/sq ft. Tile costs $7-$15/sq ft. Carpet is $2-$5/sq ft. A typical 1,000 sq ft job costs $3,000-$7,000 for LVP or $6,000-$12,000 for hardwood.

Factors That Affect Price

  • Material (hardwood, LVP, tile, carpet)
  • Square footage
  • Subfloor condition
  • Removal of existing flooring
  • Room complexity and transitions

How Much Do Junk Removal Cost in the Triad?

Low End

$100

Average

$300

High End

$800

per load · Based on Triad area pricing

Junk removal in NC costs $100-$250 for a quarter truck load, $250-$400 for a half load, and $400-$800 for a full truck load. Single item pickup (couch, appliance) runs $75-$200. Full home cleanouts cost $1,000-$3,000+.

Factors That Affect Price

  • Volume (fraction of truck vs. full load)
  • Weight and type of items
  • Location accessibility (stairs, distance from truck)
  • Hazardous materials
  • Donation/recycling sorting

How Much Do Chimney Service Cost in the Triad?

Low End

$100

Average

$300

High End

$3,000

per service · Based on Triad area pricing

Chimney sweeping in NC costs $150-$300. Chimney inspection runs $100-$250. Cap installation costs $200-$600. Chimney liner replacement ranges from $1,500-$3,000. Masonry repair can cost $500-$3,000+ depending on damage.

Factors That Affect Price

  • Cleaning vs. inspection vs. repair
  • Chimney height and access
  • Creosote buildup level
  • Cap or liner replacement
  • Masonry repair needed

How Much Do Generator Installation Cost in the Triad?

Low End

$3,000

Average

$8,000

High End

$15,000

per unit · Based on Triad area pricing

A portable generator setup in NC costs $500-$2,000. Whole-home standby generator (Generac, Kohler) installation runs $5,000-$15,000 depending on size. A 22kW generator serving a full house typically costs $8,000-$12,000 fully installed.

Factors That Affect Price

  • Generator size (kW rating)
  • Fuel type (natural gas, propane, diesel)
  • Transfer switch installation
  • Electrical panel capacity
  • Concrete pad and gas line work

Frequently Asked Questions

How accurate are these cost estimates?

Our estimates are based on average pricing from service providers in the Piedmont Triad area. Actual costs vary based on job complexity, materials, timing, and specific provider pricing. Get exact quotes by requesting estimates from our listed professionals.

Why do prices vary so much between providers?

Price differences reflect experience level, licensing, insurance coverage, warranty offerings, and quality of materials used. The cheapest option isn't always the best value — consider reviews, credentials, and warranty when comparing.

How can I get the best price?

Get at least 3 quotes from different providers, ask for itemized estimates, check for seasonal promotions, and consider scheduling during off-peak times. Use our directory to compare ratings and request free quotes.